Pladrac made oil coolers are having range of manufacturing up to 2500LPM oil flow rate (4,50,000Kcal/hr). Normally oil coolers are available from 3/8" diameter copper tubes. Though these oil coolers are compact in size perhaps with lower prices but it is easily blocking by dirt and scaling inside the copper tubes. In our oil coolers we use 5/8" diameter tubes to avoid this big issues. You will definitely rewarded with less maintenance and longer life of our cooler.
| Model | Shell OD | LPM | Coupling Size Of Oil Connection In BSP | Coupling Size Of Water Connection In BSP | Nos. Of Copper Tubes | Total Length - End To End |
|---|---|---|---|---|---|---|
| PHE1 | 4" | 14 | 3/4" | 3/4" | 6 | 20" |
| PHE2 | 4" | 18 | 3/4" | 3/4" | 6 | 24" |
| PHE3 | 4" | 23 | 3/4" | 3/4" | 6 | 26" |
| PHE4 | 4.5" | 32 | 3/4" | 3/4" | 8 | 24" |
| PHE5 | 4.5" | 36 | 3/4" | 3/4" | 8 | 26" |
| PHE6 | 4.5" | 41 | 3/4" | 3/4" | 10 | 26" |
| PHE7 | 5" | 45 | 3/4" | 3/4" | 10 | 26" |
| PHE8 | 4.5" | 50 | 3/4" | 3/4" | 8 | 30" |
| PHE9 | 5" | 54 | 3/4" | 3/4" | 10 | 30" |
| PHE10 | 5" | 68 | 3/4" | 3/4" | 10 | 36" |
| PHE11 | 5" | 77 | 3/4" | 3/4" | 12 | 36" |
| PHE12 | 6.5" | 86 | 1" | 1" | 12 | 30" |
| PHE13 | 6.5" | 90 | 1" | 1" | 16 | 30" |
| PHE14 | 6.5" | 99 | 1" | 1" | 12 | 36" |
| PHE15 | 6.5" | 104 | 1" | 1" | 16 | 36" |
| PHE16 | 6.5" | 113 | 1" | 1.1/4" | 16 | 42" |
| PHE17 | 6.5" | 135 | 1.1/4" | 1.1/4" | 16 | 48" |
| PHE18 | 6.5" | 158 | 1.1/4" | 1.1/2" | 16 | 54" |
| PHE19 | 6.5" | 180 | 1.1/4" | 1.1/2" | 16 | 80" |
